reCamera Gimbal 2002w 64GB Pan-Tilt AI Camera Kit

reCamera Gimbal puts a reCamera 2002w on two brushless motors so it can turn and follow what its AI model sees. It covers 360 degrees of yaw and 180 degrees of pitch, and ships as a kit you put together with the included screws and tools. It is a good fit for tracking demos, research and robotics prototypes.

What you can build

• Following and counting people as they move
• Gesture-controlled camera movement
• Tracking a moving object such as a vehicle
• Robotics and pan-tilt research with open firmware

Key specifications

Compatible software and platforms

Node-RED with reCamera nodes, SenseCraft AI, RTSP, HTTP, WebSocket and MQTT.

What's in the box

• reCamera 2002w
• Gimbal head, arm, base and base cover
• Power supply board
• Antenna
• MS3506 and MS3008 motors
• Screw set
• DC jack (5521) to XT30 adapter and XT30 lead
• 6-pin JST cable
• Screwdriver and hex key

Buy separately

• 12V DC power supply (not listed in the package contents)
• Commercial Ultralytics licence for commercial use of YOLO models

Setup

Assemble the gimbal with the supplied tools following Seeed's guide, connect 12V power, then configure tracking in Node-RED.

Specifications and package contents are from the manufacturer's product page and may change between production batches.

Works well with

• reCamera 2002 64GB Open-Source AI Camera
• reCamera Pro Edge AI Camera (2GB or 4GB)
• SO-ARM101 Pro Assembled Kit, Leader and Follower Robotic Arms