3D Printer PLA

$47.99
QTY:

This is 1.75mm PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic 3D printers. It comes with one spool that can be easily attached on 3D printer.    
    PLA is an environmental-friendly polymer originally derived from crops as maize. Different from ABS, PLA has a firm glass transition temperature, around 60 °C to 65°C , and requires a lower extruder temperature, around 180 °C to 200 °C . As for mechanical performance, PLA is dimensionally stable so that a heat bed can be eliminated, but PLA has a higher coefficient of friction at the same time so more adjustment is needed to avoid extruder jams.  Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

Specification

  • Diameters: 1.75mm
  • Weight:1kg
  • PLA Parameter
  • Physical Property Typical value
  • Tensile Strength@Yield: 46Mpa
  • Tensile Elongation@Break: 20%
  • Flexural Strength: 70Mpa
  • Flexural Modulus: 3212Mpa
  • Notched lzod lmpact(23℃): 5.2kj/㎡
  • HDT@66psi: 58℃
  • Density: 1.31g/cm3
  • MFR: 10-14g/10min
  • Accuracy: A:3.00±0.1mm, B:1.75±0.1mm